V400m - Connect to your Network

Connect your terminal to the internet so that it can communicate with the payments platform and your own back-end systems.

Connect to Wi-Fi

1. On the terminal display, select Configure network

2. Select Wi-Fi.

3. Turn on the Wi-Fi toggle switch.

4. Select the + icon to add a network.  The terminal scans for Wi-Fi networks.

5. Choose the desired network from the list and enter the Wi-Fi password, or select Add manually and enter the name (SSID) of the Wi-Fi network and the Wi-Fi password.

6. Select the check mark to confirm.

The terminal sets the network as default automatically and connects to it.

You will now see a Wi-Fi icon at the top of the display.

If you need to change Wi-Fi usage: go to Updating the connection settings

___________________________________________________

After the terminal is boarded

If you need to change Wi-Fi usage after the terminal is boarded:

    1.  Select Settings>Network

    2.  Enter your passcode.  (if a passcode is needed, contact support)

    3.  Select Wi-Fi.  You can now:

• Turn Wi-Fi on or off using the Wi-Fi toggle switch.
• Change IP settings.
• Add another network as described above.

___________________________________________________

Cellular failover

Your V400m terminal can automatically switch to processing payments using a cellular connection when the internet connection fails. The processor terminals come with a pre-installed and activated SIM card so you can use the cellular network immediately to board the terminal.

However, terminals boarded before 2022 might not have the SIM card activated if you did not set up the card subscription with us at the time.

When in doubt, contact your Support Team.

V400m - Table of Contents