By default, DHCP is enabled on the UX300 unattended payment terminal. With this setting, your DHCP server assigns an IP address to the terminal.
To let your DHCP server assign an IP address, skip this step and go to the next step: Board the terminal.
If you can't use a DHCP server, define a static IP address.
Define a static IP address
If you are not able to use a DHCP server, you need to disable DHCP and define a static IP address for the terminal.
1. On the UX100 PIN pad, press 9 and then press OK.
2. Enter the PIN code for the Admin menu and press OK. If you don't know this code, see our POS Troubleshooting section.
3. Select 1 Network and press OK.
4. Select 2 Ethernet and press OK. The IP settings page opens with the pointer in the IP address field.
5. Disable DHCP: press the Up arrow key to go to the Use DHCP checkbox at the top of the page, and then press OK to clear the checkbox.
6. Enter your network information in the remaining fields.
To go from field to field, use the Up and Down arrow keys.
To remove characters, press CORR.
To type a dot (.) press 0 two times.
7. To apply the changes and close the menu, press STOP.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article