1. Connect an Ethernet cable between the ETH (LAN) port of the UX300 card reader and your network.
Only connect a regular Ethernet cable to the ETH (LAN) port. Using any other type of cable or another port might severely damage the device.
2. Connect the card reader to the UX400 NFC-reader:
Connect an antenna cable between the UX400 RF port on the card reader and the NFC-reader.
Connect an RJ-45 communication cable between the COMM port on the card reader and the NFC-reader.
3. Connect the card reader to the UX100 PIN pad with a USB Type A-B cable, using the powered USB-1 port on the card reader.
4. Connect the card reader to a power supply unit in the self-service machine or to an external power source, using the DC-in port on the card reader.
The UX terminal now starts up.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article