V400c Plus - Get Started

These are the steps to get your new V400c Plus payment terminal up and running.

1. Inspect the terminal.

2. Insert the receipt paper roll.

3. Open the cover on the back of the terminal, connect the dongle cable, and close the cover.

4. Turn on the terminal by connecting it to a power source. During startup the display turns on and off a few times.

5. Select Configure network. Then connect the terminal to your network.

6. Select Board the terminal, select your store, and select Confirm. Boarding can take up to 30 minutes.

   If Board the terminal doesn't show, wait until the next synchronization with the platform (on average three hours) and try again.

7. Test the connection with the platform.

8. Test the connection with your POS system. Skip this step if you will use the terminal as a standalone terminal.

When you have completed these steps, you are ready to process payments!

V400c Plus  -  Table of Contents