These are the steps to get your new P400Plus payment terminal up and running. Some steps include a link to more detailed instructions.
1. Inspect the terminal.
2. Open the cover on the back of the terminal, connect the dongle cable, and close the cover. Tighten the cam lock screw on the back cover (if present), to help prevent damage to the cable connector caused by pulling the cable.
3. Turn on the terminal by connecting it to a power source. During startup, the display turns on and off a few times.
4. Select Configure network. Then connect the terminal to your network.
5. Select Board the terminal, select your store, and select Confirm.
Boarding can take up to 30 minutes.
If Board the terminal doesn't show, wait until the next synchronization with the platform (on average 3 hours) and try again.
6. Test the connection with the platform.
7. Test the connection with your POS system.
8. Quick Installation Guide.
When you have completed these steps, you are ready to process payments.
IMPORTANT: If you turn on your device and it does not connect allow it a few minutes as sometimes the device will need to complete updates before you can connect your device.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article